Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterNikro Air Quality & Sanitizing in Leesburg: What to Know First
We provide independent Nikro air quality and sanitizing service in Leesburg, typically scheduling within 3-5 business days and completing most jobs in a single visit. Every Nikro system we touch gets a written price before work starts, a documented photo record of every duct run, and the 365-Day Done Right Promise in writing. This page is for Nikro owners in Leesburg neighborhoods like Lansdowne, Ashburn Village, and the older homes near Ida Lee Park who need mold treatment, bacteria sanitizing, odor removal, UV light installation, or allergen reduction, and want to know what the work actually costs and what they’ll receive to prove it was done. Call (571) 487-7204 for a free estimate.
How Nikro Products Fail - and How We Fix Them
- UV-7000 Series lamp housing seal degradation. The rubber gaskets on these units harden after 3-4 years of Leesburg’s freeze-thaw cycling and summer humidity spikes, letting moisture into the ballast compartment. We replace with OEM-spec silicone gaskets or upgrade to the marine-grade aftermarket housing from Abatement Technologies, photographing the corrosion pattern before quoting.
- APS-2000 air purifier ionizer wire fouling. The needle-point array in these whole-home units collects cooking grease and pet dander faster than spec sheets suggest, especially in open-plan Leesburg homes with gas ranges. We remove the array, ultrasonic-clean in-house, and treat the downstream duct with EPA-registered sanitizer - not just wipe-and-go.
- PDR-2000 negative air machine HEPA seal compromise. The cam-lock door seal on these portable units fatigues if the machine travels between job sites weekly. We test seal integrity with a smoke pencil, replace the gasket if leakage exceeds 0.5%, and log the test result in your job record.
- Nikro gas-powered heater combustion chamber sooting in crawlspace installs. In Leesburg’s clay-heavy soils, crawlspace humidity runs 15-20% above grade-level readings, and the NG-1500’s draft inducer can pull condensate back into the burner if the vent slope is flat. We check slope with a digital level, re-pitch if needed, and treat the affected duct runs with antimicrobial fogging.
- EC-5000 series electrostatic cell arcing. The collector cell frames warp slightly after repeated hot-water washing, creating gap spots where voltage arcs to ground. We measure frame squareness with a feeler gauge; if warp exceeds 1/16 inch, we source the OEM cell or match the spec with a Guardsman aftermarket unit - your choice, priced both ways in writing.
Our Nikro Air Quality & Sanitizing Process
- 1
Inspection with documentation. We feed a borescope through every accessible duct run, starting at the plenum - the main distribution box - and working to each register. You see what we see before any price is discussed.
- 2
Written scope and price. Haven Standard Clause 1: the price is printed, itemized, and signed before a panel comes off. No verbal estimates, no “we’ll see what we find.”
- 3
Equipment match. For Nikro systems, we verify whether OEM parts are in regional stock or if a quality aftermarket equivalent meets the original spec. We name the manufacturer - Abatement Technologies, Guardsman, Honeywell - and show you the cut sheet.
- 4
Service execution with photo record. Every duct run is photographed before and after treatment. Mold remediation gets pre-treatment moisture readings and post-treatment verification. UV installs get ballast voltage logged.
- 5
System test and sign-off. We run the Nikro unit through a full cycle, measure static pressure at the return, and deliver your photo record and written warranty before we pack tools.
- 6
365-Day Done Right follow-up. The promise is in writing. If the odor returns, the mold reappears, or the UV lamp fails early, we make it right.
Before
AfterWhat Nikro Air Quality & Sanitizing Costs in Leesburg
| Service | Typical Range | What Moves It |
|---|---|---|
| UV light installation (single lamp, existing duct) | $380-$620 | Duct material (flex vs. sheet metal), access panel fabrication |
| Whole-home air purifier install (Nikro APS series) | $1,200-$1,850 | Electrical run length, return plenum modification |
| Mold treatment per system (negative-pressure extraction + antimicrobial) | $650-$1,100 | Linear feet of affected duct, liner vs. bare metal |
| Bacteria/odor sanitizing (fogging, no mechanical failure) | $280-$450 | Number of registers, presence of pets/smoke residue |
| Allergen reduction (HEPA bypass + duct sealing) | $890-$1,400 | System tonnage, existing leakage measured at blower door |
These are whole-system prices, not per-vent teaser rates. The only way to know your exact number is to inspect your specific Nikro system and duct layout. Call (571) 487-7204 for a free estimate.
Why Leesburg Homeowners Call CleanRun Duct Repair & Cleaning for Nikro Work
We’ve been in Leesburg since 2013, and the camera goes in before the quote comes out. Every Nikro job gets the same deliverables: written price, documented photo record, and the 365-Day Done Right Promise backed in writing. Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier air quality equipment, so if your home has mixed-brand components, we don’t hand you off. Tomas Reyes runs the crew with a straightforward standard - the inspection camera goes in first, and every recommendation gets backed by a still frame or a written measurement. No phantom problems, no inflated scope.
FAQs
No. As an independent Nikro service provider, we use OEM-spec or equivalent parts and document our work so warranty claims remain valid. We keep photos and part numbers in your job record if you ever need to file with Nikro. Call (571) 487-7204 if you want us to review your warranty terms before scheduling.
We deliver before-and-after photos of every treated duct run, plus post-treatment moisture readings. If we applied antimicrobial fogging, we note the product EPA registration number and dwell time in your written scope. The 365-Day Done Right Promise covers recurrence. Call (571) 487-7204 to schedule.
Replace if the ballast housing shows corrosion or the lamp socket is heat-damaged; repair if the issue is a failed lamp or degraded gasket. We price both paths in writing and show you the camera evidence. Most Leesburg homes we see with UV units installed 2015-2019 are due for lamp replacement regardless - the 9,000-hour rated life translates to roughly 3-4 years of continuous operation.
OEM fits without modification; quality aftermarket from Abatement Technologies or Guardsman often matches spec at lower cost. We stock both, show you the cut sheets, and let you decide. Haven Standard Clause 1 requires the price for each option in writing before work starts.
Most appointments are available within 3-5 business days. We don’t overbook, and we don’t send crews to Leesburg from outside the area - our team is local. Call (571) 487-7204 for the next available slot.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Leesburg at CleanRun Air Duct Cleaning Leesburg, serving Leesburg and nearby areas.