Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies HVAC Cleaning in Leesburg: What to Know First
CleanRun provides independent Abatement Technologies HVAC cleaning in Leesburg with written upfront pricing and a documented photo record of every system. Most Abatement Technologies evaporator coil and blower cleanings are completed in a single scheduled visit, with the full scope and price fixed before any panel comes off. We’re not affiliated with or authorized by Abatement Technologies - we are an independent Abatement Technologies service provider - which means our recommendations are based on what the inspection camera shows, not on manufacturer scripts. If you own an Abatement Technologies air handler in a Leesburg home built between 2015 and 2025, the odds are good we’ve already serviced the same model in your neighborhood. Call (571) 487-7204 for a free estimate with a written price delivered before work starts.
How Abatement Technologies Products Fail - and How We Fix Them
- PRED 1200 / 1600 Series: Blower wheel imbalance from debris adhesion. These units use a forward-curved centrifugal wheel that collects fine particulate between the blade roots, especially in Leesburg’s pollen-heavy spring seasons. The imbalance shows up as a low-frequency rumble at 600-900 RPM, often misdiagnosed as a motor bearing issue. We remove the wheel assembly, clean each blade root with a non-metallic scraper, and rebalance on a static balancer before reinstalling. The camera goes in before the quote comes out.
- HEPA-AIRE SAH Series: Evaporator coil face loading from high-humidity operation. Leesburg’s July-August dew points regularly push these coils past their designed moisture-shedding threshold, causing a mat of biological growth across the first 2-3 rows. Standard pressure washing drives debris deeper into the fin pack. We apply a foaming cleaner formulated for aluminum microchannel coils, let it dwell to the manufacturer’s spec, then extract with low-pressure reverse rinse - documented with before-and-after photos of the coil face.
- ABATEMENT CAT Series: Secondary drain pan deterioration at the seam weld. The galvanized pans in these compact air handlers develop electrolytic corrosion where the seam meets the condensate standing water, particularly in homes with whole-home humidifiers. We clean the pan, treat the seam with an epoxy encapsulant rated for wet environments, and install a float switch if one is absent. This is warranty-safe maintenance that does not void the original equipment coverage.
- PORTA-AIRE Portable Units: Clogged condensate pumps from algae bloom. The small reservoir in these portable systems breeds algae in Leesburg’s warm shoulder seasons when the unit cycles intermittently. The pump stalls, the reservoir overflows, and the safety switch kills the compressor. We disassemble the pump head, clean the impeller housing with a descaling agent, and treat the reservoir with a non-toxic algaecide tablet - not a bleach solution, which degrades the pump seals.
- Abatement Technologies HEPA filtration modules: Pressure drop from pre-filter neglect. The final HEPA in these modules is protected by a pleated pre-filter that homeowners often forget exists. When the pre-filter loads past 0.5 inches w.c., the blower works harder and the module housing flexes at the corner seams. We log the pressure drop with a digital manometer, replace the pre-filter with an OEM or equivalent-rated aftermarket unit, and photograph the housing seam condition for the job record.
Our Abatement Technologies HVAC Cleaning Process
- 1
System identification and access. We record the model, serial, and installation date from the Abatement Technologies nameplate, then photograph the access panel orientation before removal.
- 2
Inspection camera survey. A borescope enters the plenum and each duct run to document debris type, volume, and location - the customer receives these still frames as part of the standard deliverable.
- 3
Written scope and price. Haven Standard Clause 1: the full price is written and agreed before any cleaning begins. No per-vent pricing, no add-ons discovered mid-job.
- 4
Component-level cleaning. Blower wheel, evaporator coil, condensate pan, and heat exchanger are each addressed with tools matched to the Abatement Technologies material specs - brass brushes on aluminum, nylon on coated steel.
- 5
Operational test and photo record. We run the system through a complete cycle, measure temperature split and static pressure, and deliver before-and-after photos of every cleaned component.
- 6
365-Day Done Right Promise documentation. The written guarantee is included in the job record, not a separate marketing piece. If it’s not right, we make it right.
Before
AfterWhat Abatement Technologies HVAC Cleaning Costs in Leesburg
These are the whole-system price ranges we have written for Abatement Technologies jobs in Leesburg over the past 24 months:
- Evaporator coil cleaning: $340-$520
- Blower wheel and housing cleaning: $280-$410
- Full air handler cleaning (coil, blower, pan, cabinet): $620-$890
- Condenser coil cleaning (outdoor unit): $220-$340
- Heat exchanger cleaning with combustion analysis: $380-$550
- Coil treatment with corrosion inhibitor: $95-$140 (add-on to coil cleaning)
What moves the price: accessibility (attic vs. closet), fin condition (straightening adds time), and whether the system has been cleaned before or we’re addressing years of accumulation. Every price is written and agreed before work starts. Call (571) 487-7204 for an exact quote - estimates are free.
Why Leesburg Homeowners Call CleanRun Air Duct Cleaning Leesburg for Abatement Technologies Work
We’ve been the crew homeowners near Ida Lee Park call when the return grilles haven’t been pulled since the house was built. Tomas Reyes, our owner, picked up his trade fundamentals at Triangle Tech in New York and spent two decades working HVAC systems up and down the East Coast before establishing CleanRun in 2013. That background shows up in how we handle Abatement Technologies equipment - we know the fin spacing on the SAH series coils, the torque spec on the CAT series blower mounts, and which aftermarket pre-filters meet the OEM pressure-drop curve without voiding warranty coverage.
Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier systems, so when a Leesburg home has mixed-manufacturer equipment, we don’t hand off to a second contractor. Every job includes the Documented Photo Record, the written price under Clause 1, and the 365-Day Done Right Promise in writing. Since 2013, we’ve served 52,000+ homes with this exact protocol.
FAQs
No, provided the cleaning follows manufacturer-specified methods and no components are altered or damaged during service. We document our process with photos and written scope, which serves as evidence of proper maintenance if a warranty claim arises. Call (571) 487-7204 if you need a copy of our service protocol for your warranty file.
Quality aftermarket filters that match the OEM pressure-drop and efficiency ratings are acceptable and will not void warranty coverage. We source pre-filters and final filters from Guardsman and Aprilaire that meet or exceed the Abatement Technologies spec, and we log the pressure drop before and after installation to confirm the blower is not overloaded. The specific filter recommendation depends on your model and static pressure budget.
You receive a Documented Photo Record of every component before and after cleaning as a standard deliverable - not upon request, not for an extra fee. The photo record includes timestamps and component labels. If the photos don’t match the scope, Haven Standard Clause 1 and the 365-Day Done Right Promise apply.
In most cases, a rumble at startup or low speed indicates blower wheel debris imbalance, not motor failure. We inspect with a borescope first; if the wheel is loaded with debris, cleaning and rebalancing runs $280-$410. If the wheel is cracked or the motor bearings are failing, we’ll show you the damage and write a replacement price. We do not quote replacement unless the component is actually failed. Call (571) 487-7204 for an inspection.
Every 3-5 years for the evaporator coil and blower, and annually for the condensate pan and drain line in homes with continuous dehumidification or whole-home humidifiers. Leesburg’s pollen load and summer humidity accelerate biological growth on coils compared to drier inland climates. We date-stamp our photo records so you have a baseline for scheduling the next service.
Ready to see what’s actually inside your Abatement Technologies system? Call (571) 487-7204. We’ll answer with a live person, schedule a free estimate, and deliver a written price before any work starts. Every job includes the Documented Photo Record and the 365-Day Done Right Promise.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Leesburg at CleanRun Air Duct Cleaning Leesburg, serving Leesburg and nearby areas.