Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Quality & Sanitizing in Leesburg: What to Know First
CleanRun provides independent Abatement Technologies air quality and sanitizing service in Leesburg, with most jobs scheduled within a few business days and completed in a single visit. We deliver a written price before any panel comes off, and every duct run is photographed before and after. If you own an Abatement Technologies HEPA-AIRE, CAP600, or PRED750 system and need mold treatment, bacteria sanitizing, odor removal, or UV light installation, we handle the full scope under the H.A.V.E.N. Standard. Call (571) 487-7204 for a free estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- HEPA-AIRE portable units with clogged final filters - The H500 and H2000 series pull high static when the HEPA media loads up with fine particulate, which strains the blower motor and drops airflow below the manufacturer’s rated CFM. We measure actual airflow at the discharge with a calibrated anemometer, replace the filter with genuine Abatement Technologies media or a tested equivalent, and record the before-and-after pressure drop in inches of water column.
- CAP600-C central air purifiers with failed UV-C lamps - The 16-inch germicidal lamps in these whole-house units lose output after roughly 9,000 hours, but the blue glow can still look active while UV-C output has dropped below effective dosage. We use a UV-C radiometer to verify actual output at the lamp surface; if it’s below 40 µW/cm², we replace with Abatement Technologies-specified 254nm lamps and document the reading.
- PRED750 negative-air machines with worn blower seals - These remediation workhorses develop leaks at the motor shaft seal after heavy use, breaking the negative pressure that contains airborne contaminants during mold or asbestos jobs. We pressure-test the cabinet to 0.02 inches w.c., replace the shaft seal with OEM-spec Viton, and verify hold time before the unit goes back into service.
- Abatement Technologies HEPA vacuums with compromised hose integrity - The flexible suction hoses on H2000L and H500L units fatigue at stress points near the wand connection, creating bypass leaks that defeat HEPA containment. We smoke-test the full hose assembly, replace sections with Abatement Technologies corrugated hose or reinforced aftermarket equivalent rated to the same 99.97% @ 0.3 micron standard, and pressure-test before return.
- CAP600 units with fouled catalyst media in the odor-control stage - The activated carbon/potassium permanganate blend in these hybrid purifiers saturates faster in Leesburg’s humid summer months when outdoor moisture loads are high and homes near the Potomac floodplain run dehumidifiers less than they should. We weigh the spent media against the factory charge, replace with fresh Abatement Technologies catalyst or equivalent spec, and note the replacement date on the unit for future reference.
Our Abatement Technologies Air Quality & Sanitizing Process
- 1
Inspection with documentation - We arrive with the Abatement Technologies model number already confirmed, run the inspection camera through the full duct system, and photograph every run before touching equipment. The camera goes in before the quote comes out.
- 2
Written scope and price - Haven Standard Clause 1: we deliver a written price for the complete job - no per-vent add-ons, no trip charges buried in fine print. You approve before work starts.
- 3
Component-level diagnosis - We test UV output, pressure-test cabinets, measure airflow, and check filter differential pressure. If an OEM part is in stock locally, we use it; if lead time is excessive, we specify a quality aftermarket equivalent and show you the spec sheet.
- 4
Service execution with photo record - Every step is photographed: the opened unit, the replaced component, the test reading, the reassembled system. These images are yours as part of the standard job record.
- 5
Post-service verification - We rerun the same tests from step three and record the results. If the numbers don’t meet manufacturer spec, we keep working.
- 6
365-Day Done Right Promise activation - The written guarantee goes into your file. If anything we touched isn’t right, we make it right.
Before
AfterWhat Abatement Technologies Air Quality & Sanitizing Costs in Leesburg
| Service | Typical Range | What Moves the Price |
|---|---|---|
| UV-C lamp replacement (CAP600 series) | $180 - $340 | Single vs. dual-lamp configuration; access to plenum |
| HEPA filter replacement + airflow test (H500/H2000) | $220 - $380 | Filter size (24x24x12 vs. 24x24x6); pre-filter condition |
| Full bacteria sanitizing with EPA-registered disinfectant | $420 - $680 | System tonnage; number of supply runs; contamination level |
| UV light installation (new mount, no existing CAP600) | $680 - $1,120 | Plenum material (sheet metal vs. duct board); electrical run length |
| Odor removal with ozone or hydroxyl treatment | $520 - $840 | Treatment time; source accessibility; follow-up HEPA filtration |
These are whole-system prices agreed in writing before work starts. We do not quote per-vent or per-register pricing. Call (571) 487-7204 for an exact quote - estimates are free.
Why Leesburg Homeowners Call CleanRun Air Duct Cleaning Leesburg for Abatement Technologies Work
We’ve been serving Leesburg since 2013, and the homes near Ida Lee Park are familiar territory - many built during the 2015-2020 boom with Abatement Technologies air quality equipment installed by the original HVAC contractor, then never serviced. Tomas Reyes and our crew know the difference between a CAP600 that needs a lamp and one with a failed ballast that shows the same symptom. We’re also equipped for Lennox, Trane, and Carrier systems when your home has mixed equipment or the Abatement Technologies unit is integrated with another brand’s air handler. Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. The photo record, the written price, and the 365-Day Done Right Promise are standard on every job - not upgrades, not manager’s discretion.
FAQs
No - independent service does not void the manufacturer’s warranty, provided the work is performed to their published specifications and genuine or equivalent-spec parts are used. We document part numbers and test results so warranty coverage remains intact. If your unit is still under factory warranty, we note that in the written scope and flag any repairs that should route through Abatement Technologies directly. Call (571) 487-7204 and we’ll verify your warranty status before scheduling.
You receive a Documented Photo Record of every duct run, before and after, plus the written test results: UV output readings, pressure differentials, or airflow CFM depending on the service performed. This is standard on every CleanRun visit, not an extra. If a company won’t show you the inside of your ducts, you’re buying a promise, not a service.
Replacement makes sense when repair costs exceed 50% of a comparable new unit, or when the equipment is past 12-15 years and multiple components are showing wear. For Abatement Technologies HEPA-AIRE portables, that threshold is lower - the H500 and H2000 are workhorse units worth repairing if the blower housing is sound. We give you both numbers in writing and let the math decide.
A standard CAP600 UV lamp swap takes 45-90 minutes including testing, with the system offline for roughly half that time. If we discover a failed ballast or degraded lamp socket, we stock the common Abatement Technologies electrical components and can complete the repair same visit. Call (571) 487-7204 to schedule - most Leesburg appointments are available within two to four business days.
We use OEM when lead time and price are reasonable; we use quality aftermarket equivalents when they’re not, and we show you the spec sheet proving equivalent performance. Haven Standard Clause 1 requires that every part be named in the written scope before work starts. No surprises, no generic “compatible” parts without documentation.
Ready to schedule? Call (571) 487-7204 for a free estimate on your Abatement Technologies air quality and sanitizing service in Leesburg. We’ll confirm your model, explain what the inspection will cover, and deliver a written price before any work begins.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Leesburg at CleanRun Air Duct Cleaning Leesburg, serving Leesburg and nearby areas.