Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Air Duct Cleaning in Leesburg: What to Know First
We provide independent Abatement Technologies air duct cleaning in Leesburg for residential systems, with most jobs completed in a single scheduled visit and a written price delivered before any panel comes off. Typical whole-system cleaning runs $380-$620 for a standard single-furnace home in the Leesburg market, with larger homes or systems with multiple plenums running higher. The camera goes in before the quote comes out.
This page is for homeowners in Leesburg, Lansdowne, and the surrounding Loudoun County area who own an Abatement Technologies air filtration or duct-mounted unit and need the system cleaned without the uncertainty of coupon pricing or undocumented work. Call (571) 487-7204 to schedule a free estimate with a written price.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 600 Series HEPA units: The sealed-gasket access doors on these portable filtration systems compress over time, especially in Leesburg’s humidity swings between summer wet seasons and dry winter heating cycles. We inspect the gasket integrity before any duct connection work, replace with OEM-spec foam if degraded, and document the seal test with a photo.
- H2000i Central Air Cleaners: The ionizing wires in these whole-house units foul with conductive debris (cooking grease, pet dander, pollen) faster than passive media filters. During duct cleaning, we remove the cell assembly, wash it with manufacturer-approved solution rather than dishwasher shortcuts that strip the coating, and photograph the before/after conductivity.
- BD2M Duct-Mounted HEPA housings: The 2-inch filter track on these commercial-grade residential units can warp if previous cleaners used high-pressure nozzles too close to the housing. We verify track squareness with a straightedge, note any deformation in the written scope, and replace the track rather than forcing filters into a damaged slot.
- Abatement Technologies negative air machines (NADCA-compliant setups): The flex duct connections on these portable units are where leaks develop, particularly at the clamp points. Our crews torque-test every clamp with a calibrated driver, not hand-tight guesses, and include the torque reading in the job documentation.
- UV600 series ultraviolet units: The quartz sleeves on these lamp housings accumulate a mineral film from condensate carryover in summer cooling mode, common in Leesburg’s hard-water zone. We remove and inspect sleeves during full-system cleaning, replace degraded O-rings with OEM Viton rather than generic Buna-N that hardens in attic heat, and show the customer the sleeve condition on camera.
Our Abatement Technologies Air Duct Cleaning Process
- 1
Video inspection first. We feed a camera through the return plenum and at least two supply runs to show you what’s actually in the ductwork before naming a scope or price.
- 2
Written scope and price. Based on the footage, we deliver a single flat price for the whole system, not per-vent arithmetic. Haven Standard Clause 1: no work starts without a signed written price.
- 3
Abatement Technologies-specific prep. We isolate any active filtration or UV components, verify filter track condition, and protect sensitive electronics from negative-pressure extraction moisture.
- 4
Negative-pressure cleaning with Rotobrush and Nikro equipment. Agitation at the register, extraction at the trunk, with Abatement Technologies housings opened and hand-cleaned where accessible.
- 5
Component reassembly and function test. Filters reinstalled, UV lamps reseated with new O-rings if needed, and airflow verified at each register with a calibrated anemometer.
- 6
Documented Photo Record delivery. Before/after images of every duct run, plus any component conditions noted, uploaded to your job record before we leave.
Before
AfterWhat Abatement Technologies Air Duct Cleaning Costs in Leesburg
| Scenario | Typical Range |
|---|---|
| Standard single-system residential cleaning (up to 12 runs) | $380-$620 |
| Home with Abatement Technologies H2000i or UV600 (added component service) | $520-$780 |
| Larger home, 15+ runs or multiple plenums | $680-$950 |
| System with BD2M or PREDATOR integration (commercial-grade residential) | $740-$1,100 |
| Duct repair or sealing needed (separated seams, deteriorated liner) | $180-$450 additional |
What moves the price: number of duct runs, accessibility (crawlspace vs. basement), condition of the Abatement Technologies components, and whether the system has been cleaned before or is a first-time job with heavy accumulation. Every estimate is free, every price is written, and every job includes the Documented Photo Record. Call (571) 487-7204 for your exact number.
Why Leesburg Homeowners Call CleanRun Air Duct Cleaning Leesburg for Abatement Technologies Work
We’ve been the crew homeowners near Ida Lee Park call since 2013 when the return grilles haven’t been pulled since the house was built. The 365-Day Done Right Promise means if the work isn’t right, we make it right - backed in writing, not subject to manager discretion. Haven Standard Clause 3: Verified Crews - every technician is background-checked, uniformed, and identified by name before arrival.
We also service Lennox, Trane, and Carrier systems, so when your Leesburg home has mixed-brand HVAC components, we’re not guessing at interoperability. Tomas Reyes and our crew have pulled everything from construction debris to a full set of window blinds out of ductwork in this market, and we document what we find rather than tell you how to feel about it.
FAQs
No, professional cleaning by an independent service provider does not void your Abatement Technologies warranty, provided the work doesn’t damage components through improper methods. We use manufacturer-compatible procedures, document our process with photos, and if a warranty claim ever arises, your job record shows exactly what was done and when. Call (571) 487-7204 if you need a copy of your service documentation.
OEM gaskets, O-rings, and filter tracks are our default for Abatement Technologies housings because the tolerances are tight and generics often fail prematurely in Leesburg’s temperature swings. For UV lamp sleeves, we use OEM quartz; for filter media, we match MERV rating to system spec rather than brand. We list every part origin in your written scope before work starts.
Our Documented Photo Record shows the inside of every duct run before and after, with timestamps. You receive this as a standard deliverable, not an upsell. Haven Standard Clause 4: Verifiable Work. If a run doesn’t show measurable improvement, we re-clean it at no charge under the 365-Day Done Right Promise.
We inspect for asbestos-containing materials before any disturbance work; if found, we halt and refer to a licensed abatement contractor per Virginia DEQ requirements. Many pre-1980 homes in Leesburg’s historic district have this condition, and we include the inspection in our initial camera survey at no extra cost.
Every 3-5 years for most Leesburg homes, sooner if you have pets, recent renovation, or the H2000i ionizing cell shows heavy debris on its quarterly check. Homes near the Route 15 corridor with higher pollen loads sometimes need biennial service. We base our recommendation on what the camera shows, not a calendar.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Leesburg at CleanRun Air Duct Cleaning Leesburg, serving Leesburg and nearby areas.